Housing & Equipment

{{brizy_dc_image_alt imageSrc=

Cages & Housing:

Vertical Battery System


Manufactured by Reliance Poultry

A-Frame Battery System


Manufactured by Reliance Poultry

{{brizy_dc_image_alt imageSrc=

Frame Layer Cages


Product Description

Cages are supplied complete and consist of the following:

  • One nipple and drip cup per partition
  • One 5 litre header tank and float valve per tier
  • Manure deflectors installed on the middle and bottom tiers of three and four tier cages
  • 0.8 – 1.2 mm galvanised feed troughs and accessories

Capacity

  • 2 Tier – 100 commercial layers per
  • unit water pressure: created by header tank
  • 3 Tier – 150 commercial layers per
  • unit water pressure: created by header tank
  • 4 Tier – 200 commercial layers per
  • unit water pressure: created by header tank


Length: 2.45m

Width: 2.00m

Two tier height: 1.60m

Three tier height: 1.85m

Four tier height: 2.45m

Layer Cage Automation


Gantry Feeding Systems for Layer Cage

  • Feed dispensing cart installed over cage unit
  • Fitted to guide rails on the bottom tier, allowing feed cart to travel along the cage row and dispensing feed into the feed trough
  • Gantry systems are available in 2 tier, 3 tier and  4 tier
  • Park bays on both ends of cages
  • Gantry can be pushed by hand or automation is optional
{{brizy_dc_image_alt imageSrc=

Direct Drive Chain Feeder Systems

  • Classic, proven technique for even, low-stress distribution of feed
  • Equal access of feed to all birds and assuring uniform development and feeding


As Commercial installations get larger producers will consider options such as automatic feeding systems, automatic manure removal, as well as egg collection. Mostly these options are considered when multiple houses exist on a site and optimum efficiencies are required.

Crates:

{{brizy_dc_image_alt imageSrc=

Classic Live Bird Crate (Recycled Black)


Product Description

The Classic Live Bird Crate is made from durable H.D.P.E and is assembled with nylon rivets. It features a single component reinforced gate to prevent birds escaping, with new locating pins to assist in securing the gate in place should pressure be applied from above. There is a second handle on the lid to allow for easier handling and carrying. A distinctive profile design on both the long and short sides allows for better airflow in transit and while stationary. Permanent locating pins on the base and lid to provide additional support and strengthening. Small lid and gate grids help prevent injury to chicken heads, while small floor grids help prevent injury to chicken feet.

Capacity

Carrying Capacity6 -10 birds (size dependent)

Stack-ability8 high (Stacks with existing live bird crates)

MaterialsRecycled High-Density Polyethylene, Nylon rivets

Weight5.4kg

Dimensions

( L, W/D H )

Internal ( 700mm, 500mm, 275mm )

External ( 745mm, 545mm, 310mm )

Classic Live Bird Crate (Virgin Colour)


Product Description

The Classic Live Bird Crate is made from durable H.D.P.E and is assembled with nylon rivets. It features a single component reinforced gate to prevent birds escaping, with new locating pins to assist in securing the gate in place should pressure be applied from above. There is a second handle on the lid to allow for easier handling and carrying. A distinctive profile design on both the long and short sides allows for better airflow in transit and while stationary. Permanent locating pins on the base and lid to provide additional support and strengthening. Small lid and gate grids help prevent injury to chicken heads, while small floor grids help prevent injury to chicken feet. Standard virgin colours available are Red or Blue, with all other colours

manufactured to order based on minimum quantities.

{{brizy_dc_image_alt imageSrc=

Capacity

Carrying Capacity6 -10 birds (size dependent)

Stack-ability8 high (Stacks with existing live bird crates)

MaterialsVirgin High-Density Polyethylene, Nylon rivets

Weight5.4kg

Dimensions

( L, W/D H )

Internal ( 700mm, 500mm, 275mm )

External ( 745mm, 545mm, 310mm )

{{brizy_dc_image_alt imageSrc=

Space Saver Live Bird Crate


Product Description

The Space Saver Live Bird Crate stacks with the existing crate and boasts an astounding 420kg top loading capability. It is easy to unclip, allowing the top half to stack into the bottom half, thus requiring five times less storage space and 80% less space when transporting, and allowing for easier cleaning. The unique diamond profile between stacked crates allows for improved air flow.

Capacity

Carrying Capacity10 birds per crate

Packaging: 2500 crates per 40ft container

Weight4.046Kg

Dimensions

( L, W/D H )

Internal ( 700mm, 500mm, 275mm )

External ( 745mm, 545mm, 310mm )

Water Systems:

Parent Waterer


From 7 days old to end of cycle (POLTEK)

Automatic Waterer


From zero to end of cycle (POLTEK)

{{brizy_dc_image_alt imageSrc=

Automatic Ballistic broiler Drinker (Mk6)


Product Description

The broiler drinker is a ballasted drinker specifically designed to accommodate the complete life cycle from day one. The drinker is

fitted with independent ballast which must be filled with sand or cast in

concrete to stabilize the drinker. It comes standard with hanging attachments, a 3 meters PVC flexible water pipe and a clamp saddle with a shut off valve.

Drinking capacity: 100 Birds per Fount

Water pressure: 0.15 to 0.2 bar

Application: From days old to end life cycle

Dimensions: 460mm height X 357 mm Diameter

Weight: 1290g

Automatic Econo Drinker (Mk4) -100 birds per drinker


Product Description

The Econo- Drinker is a non ballast drinker and is excellent value for money. It has fewer assemblies and comes with standard with hanging

attachments, a 3 meters PVC flexible water pipe and a clamp saddle with a shut off valve.

Drinking capacity: 100 Birds per Fount

Water pressure: 0.15 to 0.2 bar

Application: From days old to end life cycle

Dimensions: 460mm height X 298 mm Diameter

Weight:  882g

{{brizy_dc_image_alt imageSrc=
{{brizy_dc_image_alt imageSrc=

Square


Product Description

Drinking capacity: 3 trays per 100 chicks

Application: From 1 -7 days old chicks.

Dimensions: 50mm height X 290 mm Width X 362 mm Length

Weight: 254g

12 Liters water Fount


Product Description

The 12 liters water fount can be suspended, and is height adjustable with a bayonet interlocking base and id. It is gradually for medical use and has a domed top for anti-perching. It comes standard with an

ā€œSā€-hook, 3 meters nylon cord and adjuster.

Drinking capacity: 100 Birds per Fount

Water capacity: 12 liters

Application: From days old to end life cycle

Dimensions: 400mm height X 360 mm Diameter

Weight: 1004g

{{brizy_dc_image_alt imageSrc=

Feeding Equipment:

2nd Age Feeder


3/100 chickens ratio (POLTEK)

Automatic Waterer


From zero to end of cycle (POLTEK)

{{brizy_dc_image_alt imageSrc=

Egg Collection:

{{brizy_dc_image_alt imageSrc=

30 Pocket Tray


06-10-12-15 and 18 Pocket Tray


{{brizy_dc_image_alt imageSrc=

Heating Systems:

{{brizy_dc_image_alt imageSrc=

Sunflower


Product Description

The purpose of this brooder is the raising of farm animals and heating of agricultural use warehouses. It is a progressive brooder with manual ignition. It works with LPG or Natural gas depending on the model, it could be placed inside the farm buildings.

Fuel: Liquefied gas or natural gas

Power: 6.5KW

AISI 304 Stainless steel chassis

High quality refractory stainless-steel burner

Safety gas valve with thermocouple

Air filter

One controller in charge of 1-20 Sunflower brooders

Advantages

  • Integrated gas control system under ultra-high temperature
  • Quick to heat up, efficient on radiant heating
  • Better ambiance and less gas consumption
  • Create a better life for the animals

Parameter

{{brizy_dc_image_alt imageSrc=

Comparison of similar products

{{brizy_dc_image_alt imageSrc=

SUNHEATER DO-66


Product Description

The purpose of this heater is the raising of farm animals

and heating of agricultural use warehouses.

It is an ON/OFF heater with automatic ignition. It works with LPG or Natural gas depending on the model it could be placed inside or outside the farm buildings. A biogas model is also available.

  • AISI 304 Stainless steel chassis or galvanized (depend on the model)
  • Distribution fan with fixed flow
  • Fan operation is controlled by 1 air flow switch.
  • One double gas valve controlled by an electronic circuit card and programmer.
  • Electronic ignition is produced by sparking generator
  • Flame sensor by ionization
  • Thermal protection by overheating thermostat
  • The safety control box control the operation cycle of the heater. This programme is equipped with a remote reset in case of a fault. And it can give information to the user when fault.
{{brizy_dc_image_alt imageSrc=

Advantages

  • Environmentally friendly
  • Easy to use
  • High efficiency
  • Energy saving
  • Automatic controlled by the environmental controller (or thermostat optional)

Parameter

{{brizy_dc_image_alt imageSrc=
en_USEnglish